|
REFERENCE |
DESCRIPTION |
NEMA GRADE |
INSULATON CLASS |
DIAMETERS |
STANDARD COLOR |
TYPICAL APPLICATIONS |
|
FROM (oC) |
TO(oC) |
| VG-130 |
Tough, vinyl plastisol bonded to
electrical grade braided fiberglass, combines good flexibility with
excellent abrasion and cut-through resistance |
A - 7000 V |
-20 |
130 |
AWG #24 to 1-1/2" |
Black |
Supplementary insulation of motor
transformer, generator and resistor leads. Also used in electronic circuitry,
instrument and switchboard wiring and low temperature applications. |
|
B - 4000 V |
| AG-155 |
Acrylic resin-coated fiberglass
sleeving. Highly flexible, resists mechanical damage. Compatible with most
wire enamels and varnishes. Excellent thermal endurance, high push-back and
non-blocking |
A - 7000 V |
-10 |
155 |
AWG #24 to 1-1/2"
in
reels;
1-3/4"
to 2-1/2" in 4
lengths |
Natural
(white) |
Fractional HP motor leads and
crossovers, transformer leads, welding equipment, home appliances,
electronic circuitry. Thermal protection for carbon brush leads, automotive
alternator and starter applications |
|
B - 4000 V |
|
C - 2500 V |
|
C-2 - 1500 V |
| SG-200 |
Custom formulated silicone rubber
extruded over electrical grade braided fiberglass. Extremely flexible,
resistant to temperature from -70oC to +200oC with
excellent push-back and good cut-through resistance |
A - 7000 V |
-70 |
200 |
AWG #24 to 1-1/2"
in reels;
1-3/4"to 3"
in 4 ft
lengths |
White, Black, Transprent |
Premium insulation of motor,
transformer and appliance leads, electrical equipment operating in low and
high temperature environments. Thermal insulation on automotive oxygen
sensors as well as marine and aircraft applications |
|
C - 2500 V |
| HT-1220 HT-1232 |
Braided glass, heat-treated to
remove textile sizing and provide fray resistance when cut. Flame retardant
and available in standard wall HT-1220 and heavy wall (minimum 0.032")
HT-1232 styles |
C-3
(No
dielectric value guaratee) |
-70 |
600 |
HT-1220: AWG #24 to 1-1/2";
HT-1232: AWG #16 to 3/8" |
Natural |
Brush, motor and cord set lead
insulation secondary insulation as well as critically selaed systems.
Designed for applications to 1200oF with short term performance
to 450oC |
| HTS-520 HTS-532 |
Acrylic resin saturant applied to a
heat-treated electrical grade braided fiberglass to provide body and
firmness. This flexible, fray resistant sleeving is available in standard
wall HTS-520 and heavy wall (minimum 0.032") HTS-532 styles |
C-3
(No dielectric value guarantee) |
-70 |
600 |
HTS-520:AWG #24 to 1-1/2"
HTS-532: AWG #16
to 3/8" |
Black, Natural |
Electrical appliance heating
elements, lighting fixtures, wire harness and ignitor and component leads.
Good to 1200oF
with short term performance to 450oC
|
| CONFORM |
Expandable silicone rubber-coated
fiberglass that naturally conforms to irregular shapes while exhibiting all
of the properties of standard silicone rubber fiberglass braided sleeving |
A - 7000 V |
-70 |
200 |
#13, 9, 6, 3, 0, 3/8", 1/2", 5/8" |
Black, White, Natural
(VW-1 except natural) |
Over shaped wire on form wound
coils; to cover thermal cutoffs in appliances as well as bus bar and motor
lead connections; to insulate brazed or soldered splices and irregular
shapes; excellent alternative to heat shrinkable tubings and tapes |
| WHS-25 WHS-25WR |
Custom formulated resin coating
encapsulates fiberglass braid for enhanced performance: increased wear
resistance, elimination of dermatitis and end fray, slit capabilities,
roundness retention and print capabilities. WHS-25 WR has upgraded additives
for increased wear resistance |
C-3
(No dielectric value guarantee) |
-70 |
600 |
AWG #5 to 1-1/2" |
Black, white |
Wire harness sleevings protect
automotive, aerospace and commercial wire bundles and assemblies from
mechanical abrasion and heat resources. Workability and high performance at
lower cost. |
